Get the MarkaShip appGoogle Play

Download

Jacket Vents: Check Overlap When Seated

Measure from the hem to the top of the vent and ask how far the edges overlap. Test a jacket with a similar cut while seated.

Updated 21 November 2026 · اقرأ بالعربية

Identify the vent design

Ask for a flat view of the back. A single centre vent and a pair of side vents move differently when the jacket is worn.

Check overlap at several points

Ask how far one fabric edge passes over the other near the top and bottom. Identify where the lining ends if it is stitched to the vent.

Try sitting with the jacket on

Wear a comparison jacket over your usual shirt and sit normally. Note how far the hem rises and how the fabric falls when you stand again.

Record dimensions before altering it

If you plan to shorten the jacket, ask a tailor how it will affect the vent and its overlap. Save a straight photograph showing both the back and the hem.

Common questions

Where do I start measuring?

Measure from the lower edge of the hem to the top of the vent.

Should I only check it while standing?

Check it seated and again after standing to see how the fabric settles.

What if the vent looks closed in the listing?

Ask for an inside view and confirm whether any stitch is temporary.

Sources to check

Product rules and transport conditions can change. Confirm current requirements before buying or shipping.

Related steps

Get a purchase quote

Send the exact product link and options, destination city and any acceptable substitute. Review the itemized quote and shipping eligibility before payment.

Explore Buy for Me
View cart
Home
Shop
Cart
Shipping
Buy for me
Account