Telescopic Boxes: Secure the Overlap

Locate the overlap

Identify the overlap between the two telescopic box sections. Check that the walls remain aligned after inserting the contents and protective materials.

Prevent section movement

An outer section that appears closed may slide during handling if the overlap is unsecured. Do not lift the parcel by its lid alone to test it.

Mark the intended position

Mark the intended overlap position, review the packaging instructions and record any lengthwise clearance allowing the contents to move. Secure the item without forcing the sections apart. Two 60 cm sections overlapping by 20 cm give an illustrative assembled length of 100 cm. Actual measurement after sealing remains the reference for the prepared parcel.

Measure the assembled box

Measure the parcel after securing both sections. Adding each section's full length produces an incorrect total because the overlap is counted twice in that sum.

Common questions

Sources to check

Product rules and transport conditions can change. Confirm current requirements before buying or shipping.

• www.fedex.com

Related steps

• Before Removing a Box, Save Product Evidence
• One Order, Several Boxes: Map the Components
• Bulging Boxes: Measure the Finished Parcel
• Textile Packing: Separate Surfaces in Contact
• Triangular Parcels: Record the Outer Dimensions
• Trial Assembly Before Shipping: Set the Scope

Get a purchase quote

Send the exact product link and options, destination city and any acceptable substitute. Review the itemized quote and shipping eligibility before payment.